Dragonfly Wings - Materials List

Suggested Fabrics

 

The weight of the fabric will play a big part in the structure of the wings and in the ease of sewing.

This pattern is designed for nonstretch woven fabrics only - we recommend using quilting cotton or fabric of a similar weight or lighter weight.  Cotton, linen, satin, lawn, viscose rayon, lightweight chambray, and silk are all suitable.  Please note:  It is NOT recommended to use thicker fabrics (drill, corduroy, denim etc.) as they make the wings too thick to turn out and also too thick to sew through in certain areas where there are many layers.  

Interfacing:  Using an interfacing which is not sturdy enough will result in floppy wings.  The interfacing needs to be heavyweight.  We use Formfuse 1600f which works beautifully.  Pellon 809 Decor Bond was also trialled in testing and found to be suitable.  (Birch heavyweight non-woven is not sturdy enough).

Batting:  Anything from 5mm - 20mm is suitable

Needle:  A strong sewing machine needle such as a super sharp size 90 or denim (jeans) needle.  *We recommend starting with a fresh needle.  

Elastic:  3/4" (2cm) wide - see chart below for length. 

 

Fabric Requirements

	Small	Medium	Large
Front Wing Fabric + Batting	28 x 11" (70 x 28cm)	30 x 17" (82 x 32cm)	38 x 19" (91 x 36cm)
Back Wing Fabric	"	"	"
Sew-in Interfacing	"	"	"
Interfacing x2	"	"	"
Body	11 x 17" (27 x 41cm)	12 x 20" (30 x 51cm)	14 x 25" (34 x 62cm)
Straps	30 x 11" (75 x 26cm)	38 x 11" (96 x 26cm)	46 x 11" (115 x 26cm)
Appliqué	scraps	scraps	scraps
Elastic	30" (77cm)	34" (87cm)	44" (112cm)

Return to the Dragonfly Wings Pattern